The proper and safe operation of Raspberry Pi depends on many factors, which are sometimes underestimated due to a lack of awareness of their actual function. These functions include the power supply of the Raspberry Pi, which is mainly supposed to provide power to the minicomputer. In fact, its role is much more serious. It is the power supply that determines the efficiency of the devices, their smooth functioning, service life and workload. Thus, we could argue that an inadequate power supply would negatively affect the functioning of the Raspberry, even increasing the risk of damaging its components. Therefore, it is essential to make sure that the power supply you pick not only has the right parameters, but is also compatible with your Raspberry Pi model. Our offer includes a wide range of power supply elements, which feature very good technical parameters and are designed for specific models and versions of Raspberry Pi. This allows you to easily adjust the power supply to your device. Explore our products and make sure your Raspberry runs efficiently.
Cap for Raspberry Pi acting as emergency power when you connect a lipol battery 3.7 V. It has 4 information LEDs. Supports the cascade connection to the caps. Can be used with any module connected to the GPIO pins.
Portable power supply platform for a min-computer Raspberry Pi. The module is based on ARM Cortex-M0. It has the original battery 1820 mAh from the Mororolla Droid 2 with the possibility of expanding with a battery with a capacity of 5000 mAh or even 10000 mAh. The battery can be charged using renewable energy sources such as solar or wind energy.
Extension for Raspberry Pi working as an emergency power supply when you connect the battery Li-Pol 3.7 V (included 300 mAh). It has 5 indicative LEDs and a real-time clock. It supports the serial connection to the hats. It can be used with any device connected to the GPIO pins. This extension allows you to run the Raspberry Pi using only battery power.
The power supply cable 1.2 m, sharp microUSB plug. The parameters of the power supply provide optimum power minikomputera Raspberry Pi. The output voltage is 5,1 Vand the maximum current is 3 A. Allows you to power the Raspberry Pi 3B+, 3B, 2B and Zero.
The power supply is designed to power Raspberry Pi Zero minicomputer. The output voltage is 5 V and maximum current is max. 2 A. the Power supply is equipped with a cord length of 1.2 m, which ended with a microUSB connector.
Module in the form of a hat for Raspberry Pi, which allows to supply power to a minicomputer with voltage from 3 V to 16 V. This allows the cooperation of different power supplies with Raspbery Pi. The set also includes a wire with 5.5/2.1 mm plug and a wire with wires with removed insulation.
The power supply has a built-in microUSB connector, compatible with minikomputerem Raspberry Pi. Includes options for optimal nutrition minikomputera Raspberry Pi 3B+ / 3B / 2B / Zero. The output voltage is 5 Vand the maximum output current is 2.5 A. Cable length is 1.2 m.
Extension for Raspberry Pi working as an emergency power supply when you connect the battery Li-Pol 3.7 V (included 300 mAh). It has 5 indicative LEDs and real-time clock. It supports serial connection of the extensions. It can be used with any GPIO module. Version Advanced Mobile works with a wide power supply range from 7 V to 24 V...
Overlay designed for the Raspberry Pi, Zero, performing the function of emergency power in case of loss of utility power. The module is compatible with other versions of the Raspberry Pi. UPS HAT is transferred to the device over a period of time that will allow You to keep the essential elements and safely shut down the system.
Trim that to food minikomputera Raspberry Pi version 4B and 3B+ directly to the Ethernet port, located on the Board. In addition, the panel was equipped with an active cooling fan. The input voltage is 37 Volts to 57 Volts, but the output is 5 V / 3 A.
Trim allows you to power the Raspberry Pi in the absence of electricity or on the road. Is powered by two batteries Li-Ion in the case 18650. Thanks to the built-in charging system, no need to use the optional charger to charge the batteries. Built-in chip kulometru indicates the charge level of the battery using the I2C interface, the RTC module will...
LiPo PWM is an extension for Raspberry Pi mounted directly on the GPIO connector of the minicomputer. The device has JST 2.0 mm 2-pin connectors for connecting the reachargeable battery Li-Pol or Li-Ion to power the Raspberry Pi. This extension is not a charger.
Power supply with microUSB wire and with USB slot, type A. Output voltage is 5 V, the maximum performance of the current is 3.1 A. the Device can power the Raspberry Pi minicomputer 3B+, 3B+, 2B, 1B+, 1B, 1A, Zero and Zero W and LattePanda.
Original power supply for minikomputera Raspberry Pi with a microUSB connector. Works with all models of Raspberry as: 3B+ 3B+ 2B, 1B+, 1B, 1A and Zero and Zero V. Maximum efficiency current is 2.5 A.
Original, black power supply for minikomputera Raspberry Pi with a microUSB connector. Works with all models of Raspberry as: 3B+,3B, 2B, 1B+, 1B, 1A and Zero and Zero V. Maximum efficiency current is 2.5 A.
The power supply needs much more focus than you might think. The elements should be made of high quality components and the whole must be distinguished by technology corresponding to that used in Raspberry Pi. A good power supply clearly reduces the risk of damaging the device, e.g. as a result of a power surge, which happens relatively often. When purchasing it is necessary to check the voltage. If it is too high, the device will overheat quickly, which means that some internal systems will burn out. Too low a voltage is not the best solution either. In this case, difficulties or even inability to start the device should be expected. This could also damage it.
With a good power supply for the Raspberry Pi, we can be sure that the device will start up correctly, and shut down equally well. Sometimes Raspberry turns on, but after a few seconds it reboots. This might be the result of a poor power supply. The lack of working fluidity is another problem. You should know that this results not only in reduced comfort and convenience, but also in a shorter device durability and limited possibilities to perform activities and projects on Raspberry. If the power supply is not well matched to the specific Raspberry Pi model, you can expect that the minicomputer won't work properly either.
Therefore, the question is how to choose the Raspberry Pi power supply to do its job, improve the performance of the devices and not negatively affect their efficiency and performance. Avoid unverified Raspberry Pi power supplies that are offered by poorly known companies. You may be surprised by their very low price, which should be an indication that they provide too low or high voltage, as well as the materials they are made of affect their short life. Zwróć uwagę na specyfikę zasilacza. Its voltage must be 4.75-5.25 V and its amperage from 0.7-1 A (model B) / 0.5 A (model A). It must be equipped with a microUSB. If not, you can use an adapter. Make sure that the chosen power supply is compatible with your equipment before you decide to buy one. All products from our shop are described in detail, including their compatibility with specific Raspberry Pi models.
Check out our wide and very wide range of power supplies with a microUSB cable. They look just like the famous smartphone chargers. Thus, they are so versatile that it is possible to use them also with other devices, e.g. alternatively to a phone. Beforehand, however, check whether the parameters of the power supply are appropriate for your smartphone or tablet. Furthermore, you can opt for special modules that allow the PCB to be powered via a twisted-pair cable, as well as covers that can be used as a power supply or emergency power supply, which is possible with Lipol batteries.