Raspberry Pi GPIO extensions - Strona 3
MCP23008-E/P - 8-channel I2C pin expander
The system allows to increase the number of pins (up to 8) of a microcontroller (including minicomputer Raspberry Pi). It communicates with the central unit via the I2C bus...RGB LED Hat for Raspberry Pi 3/2/Zero - Waveshare 12725
Shield for the Raspberry Pi containing the LED matrix 8 x 4 consisting of WS2812B LEDs. Each LED can be individually set. The device has dimensions of 65 x 30 mm, it works with...Blinkt! 8x adressed LED RGB - Raspberry Pi extension
Blinkt! is a shield for the Raspberry Pi mounted on GPIO connector of the minicomputer. Board has eight individually addressed RGB LEDs, ideal for adding a visual notification...LTE GPS HAT - LTE / GPRS / GPS SIM7600E-H - for Raspberry 4B/3B+/3B/2B/Zero - Waveshare 14952
Shield for Raspberry Pi that allows you to send text messages and create calls in the GSM network. It also has a GPS module. It supports LTE CAT4 up to 150 Mbps. It...Dual channel DC motor driver, I2C interface - HAT for Raspberry Pi - Waveshare 15364
HAT shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of two DC motors using the I2C interface. It can control simultaneously the two DC motors. A maximum...E-paper E-Ink flexible display (D) 2,13'' 212x104px HAT for Raspberry Pi - Waveshare 15084
Shield for Raspberry Pi with a flexible display e-paper of 2.13 " with a resolution of 212 x 104 pixels. It is connected directly to GPIO pins. It communicates via SPI...USB Hub Hat (B) - 4-port hub - overlay for Raspberry Pi 4B/3B+/3B/Zero - Waveshare 20317
A USB hub in the form of an overlay for Raspberry Pi minicomputers, manufactured by Waveshare. The device is able to expand the number of ports on Raspberry Pi by 4 more in...Logic level converter I2C PCA9306 - SparkFun BOB-15439
The module allows bidirectional communication between circuits using different voltage levels for I2C and SMBus. PCA9306 converts voltages from lower range from 1.2 V to 3.3 V...ADC 16-bit converter - 4-channel ADS1115 - overlay for Raspberry Pi
Shield for Raspberry Pi with analog-digital converter of 16-bit accuracy and a small package MSOP-10. It has programmable data transfer speed from 8 to 860, 4 analog inputs and...Li-Ion Battery HAT for Raspberry Pi - Waveshare 15141
Panel based on the system SW6106, enables powerring the Raspberry Pi using the rechargeable Li-Ion battery 14500, which makes the device portable. The device can also be used...Expansion Kit - extension Raspberry Pi to breadboard + tape + breadboard - Iduino RA028
A module that allows the GPIO Raspberry Pi pins to be led out onto the contact plate using IDC tape. The kit also includes a contact plate and 40-pin tape.GNSS/GPS/BDS/QZSS L76B module for Raspberry Pi Pico - Waveshare 20072
Waveshare GNSS module to enable multiple GPS satellite systems using Raspberry Pi Pico module. The overlay for RPi Pico is based on L76B chip and supports satellite systems...PoE Ethernet / USB HUB HAT for Raspberry Pi Zero - Waveshare 19635
An overlay that combines the function of a USB hub and a PoE power supply. Created by Waveshare module based on RTL8152B chip, extends functionality of Raspberry Pi Zero by 3...Serial Expansion HAT UART, GPIO SC16IS752 for Raspberry Pi - SB Components SKU14873
Serial expander in form of HAT overlay for Raspberry Pi minicomputers equipped with 40-pin GPIO connector. The overlay is based on SC16IS752 chip which extends Raspberry Pi...Maker Hat Base - HAT GPIO Extension for Raspberry Pi 400
The GPIO Maker Base HAT extension from Cytron, designed mainly to work with the Raspberry Pi 400 minicomputer, but can also be successfully used with other Raspberry Pi...WIZnet Ethernet HAT - W5100S - overlay for Raspberry Pi Pico - WIZnet
Trim for Raspberry Pi Pico equipped with the Ethernet TCP/IP W5100S system, which provides Internet connectivity via the Ethernet connector. The board supports wired Internet...Qwiic HAT for Raspberry Pi - SparkFun DEV-14459
Shield, type HAT for Raspberry Pi, facilitating the connection of modules SparkFun via connectors Qwiic. The shield connects the I2C bus on the Raspberry Pi with connectors Qwic.Servo PWM Pi Zero PCA9685 - 16-channel server controller for Raspberry Pi
Shield for Raspberry with 16-channel, 12-bit PWM controller for LED control, or analog servos based on system PCA9685. The output frequency is programmed in the range from 40...ADC-DAC Pi Zero MCP3203 + MCP4822 - A/C and C/A converter 12-bit SPI - overlay for Raspberry Pi
Module with high precision converter of A/C and C/A in the form of shields for GPIO connectors of Raspberry Pi. It features 2 12-bit channels of the analog outputs and 2...RPi Relay Board (B) IC Test Board - Waveshare 15275
Shield for Raspberry Pi 3 / 2 / B+ / Zero / Zero W enabling the control of up to 16 servos. It communicates via I2C interface and is based on PCA9685 system.