- EOL
|
Attention! The product has been discontinued. Check other products incategory. |
Description
Vertex Delta is a reliable 3D printer designed to print detailed objects. Has many innovative features so the print will become more interesting and enjoyable. Advanced featuresof security, lack of filamentdetector, the possibility ofreplacement the filament during printing andauto-calibrationandcompression of the table are ones of the functions of the printer. The printer comes in the form ofhybrid which means that after a short and easy installation, it is ready to work. The device will independently perform all calibration procedures.
The subject of the sale is the original printer from company Velleman.
|
The manufacturer providesdetailed instructions forinstalling and operating the device. |
The printer has a nozzle witha diameter of 0.35mm with an active cooling system with three fans, which moves atthe shoulders which are mounted on magnets, which allows its easy assembly and disassembly.Supports popularfilaments ABS, PLA, etc. with a diameter of 1.75 mm. The rest were not fully tested by the manufacturer. The work table was made oftempered glass and the frame of the printer of aluminum.
Extruder
- Extruder with direct drive.
- Reliable insertion and extraction of filament with a diameter of 1.75 mm.
- The detection of missing the filament, Delta will automatically stop printing .
- Function of changing the filament during printing, allowing you to print the item with different filaments / colors.
Base
- The first automatic calibration (no manual calibration required).
- Automatic compensation of the work table.
- Automatic detection of the SD card.
- Graphic display 128 x 64 px with blue backlight.
Head
- Head with installed nozzle is actively cooled by three fans.
- Efficient stop function without leaks of filament from the nozzle.
- Brass nozzle with a diameter of 0.35 mm, compatible with the E3D.
- Advanced security features, such as: the angle of the print head and overheating protection with accelerometer and temperature sensor.
Work table
- A removable plate made of tempered glass 4 mm.
- Sheet of nonstandard BuilTakTM as the print surface.
- Large platform with a diameter of 200 mm and a construction height of 225 mm.
Magnets
- Backlash-free, magnetic guide rails.
- Easy to install.
- Simple replacement of the printhead.
Aluminum frame
- Rigid, embossed aluminum profiles.
- Aluminum top and bottom plates with a thickness of 4 mm.
- Easily montages.
Hybrid set
- Simple and quick installation ( +/- 2 hours).
- Base, head and the extruder was factory assembled.
- Does not require soldering.
| Technical specification | |
|---|---|
| Power supply: |
from 110 V to 240 V (AC) |
| Controller: |
ATmega 2560 |
| Full power: | 90 W |
| Display: |
graphic 128 x 64 px with blue backlight |
| Print speed: |
from 20 mm/sec 50 mm/sec (max 75 mm/sec) |
| The speed | 180 mm/sec to 200 mm/sec. |
| Precision printing: |
± 0.1 mm (max. of 0.2 mm, min. 0.05 mm) |
| Print thickness: | from 0.05 mm to 0.4 mm |
| Nozzle diameter: |
standard: 0.35 mm |
| Supported filament: |
PLA, ABS, TPU, PET, etc. |
| Diameter of filament: | 1.75 mm |
| Mode of operation: | Online or from the SD card |
| Software | Repetier, Cura |
| Calibration: | Automatic |
| Design: | aluminium, magnet |
| Functions: |
the detection of the absence of filamentu, change of filament when printing overheat, stop protection |
| Platform dimensions: | 225 x 200 mm |
| Nozzle temperature: | max. 295 °C |
| The dimensions of the printer: | 770 x 350 x 350 mm |
| Weight: | 10 kg |
Useful links |
