Analog distance sensors In the structures of different types of vehicles, drones and robots, a very useful feature is the ability to detect obstacles on the route, or track way. The ideal solution in such systems would be analog distance sensors with analog output. Botland has prepared for You an offer in which you'll find analog distance sensors in different ranges. Please check out our offer today!
The sensor responds to the interrupt of the transmitted from the transmitter and receiver, infrared light. This version is equipped with LED IR of 5mm / 20 degrees, it works with a voltage of 3.3 V or 5 V. the transistor has an open collector output.
The IR transmitter, sending the wave with the length of 940 nm together with the receiver in the form of NPN phototransistor, they can be used as a simple, reflective distance sensors with analog output.
The sensor responds to the interruption of transmitted, from the transmitter to the receiver, infrared light. This version is equipped with LED IR 3 mm / 10 degrees, it is working with voltage of 3.3 V or 5 V. It has a transistor output of an open collector type.
Analog distance sensor, which can measure distance from 20 cm to 100 cm measurement Resolution is 1 cm, the Sensor has 4 output clamp connections. The supply voltage ranges from 6 V to 12 V. Works with a frequency of 49.5 kHz.
Sensors odbiciowe also called it reflective photoelectric sensorsin which the light beam is directed through the sensor is reflected from within a certain distance (depends on specific sensor) with led floodlight. Interruption of this beam of light through the object causes a change in the output signal of the sensor. The spotlight of such a sensor may be a passive element - a mirror (mirror) or an active receiver. Often nadawczym element is an led, the receiver and fototranzystor. Noteworthy are the miniature sensors analog distance with analog output series Pololu QTR-L-1A operating in the infrared range. The sensor consists of a transmitter and receiver with a size of 7.6 x 8.9 x 3.1 mm and weighing only 0.2 g. With analog output, depending on the distance between transmitter and receiver, as well as color, obstacles, located between them, generates at its output the voltage value. The sensor is ideally suited in systems in vehicles and robots, which require the ability to track the path as a motion path.
Analog distance sensors with analog output, in which the sensor responds to the change of the input signal when approaching an obstacle, the sensors are non-contact. Be for You great solution in case when you want Your robot or other vehicle has been detected an object in its path and could determine its distance in relation to it. Botland offers analog distance sensor Sharp series GP2Y that operate in bands from 2 to 15 cm, to in the range of 100 to 550 cm! If you need exact measurement, select the sensor series HSDL, which detects obstacles at a distance of 0 to 60 mm.