Analog temperature sensors allow you to easily implement the temperature measurement function for our project. Sensor output is analog, the size of the plate is proportional to the measured value. The temperature rise will make it so that the sensor output appears, for example, a higher voltage or resistance.
Analog LM35 sensor working with Arduino and Raspberry Pi. It is powered with the voltage from 3.3 V to 5 V. it can measure temperature in the range from 0 ℃ to 100 ℃. The output voltage is proportional to temperature.
Analog temperature sensor company Adafruit Plug-and-Play with 3-pin connector STEMMA. The module does not require installation of additional drivers and libraries. The output voltage is 0 V at -50°C and is 1.75 V at 125°C.
Module with temperature sensor equipped with a thermistor NTC-MF52. For control, used is an analogue or digital output. It detects the temperature in the range from -55°C to 125°C. It is powered with the voltage of 5 V.
Module with temperature sensor equipped with a thermistor NTC-MF52. In order to read values from the sensor, connect it to the analog signal of the microcontroller. It detects the temperature in the range from -55°C to 125°C. It is powered with the voltage of 5 V.
Module from the Grove series, based on a sensor OTP-538U which, to measure the temperature, is using the analysis of infrared radiation in the range from -10 °C to 100 °C. It communicates via an analog signal. It is working with the voltage from 3.0 V to 5.0 V.The kit also includes a cable adapted for Seeedstudio Base Shield v2.0.
Temperature and humidity sensor with a digital I2C interface. Measuring range: temperature is from -40 °C to + 123,8 °C, humidity is from 0% to 100 % RH. It has connectors for connecting the sensor via wires. It works with voltage from 2.4 to 5.5 V.
The Grove module is equipped with a temperature sensor powered with the voltage from 3.3 V to 5 V. System for the communication, uses the analog signal. Measurement range is -40 °C to 85 °C. The kit also includes a cable adapted for Seeedstudio Base Shield v2.0.