Modules that use radio waves for wireless communication.
The module processes the signals RC to a digital state on/off. Has a built-in MOSFET transistor, which allows control of devices with current consumption up to 15 A. because it contained voltage regulator Board can be powered with a voltage of from 2.5 to 15 Volts
A radio module (receiver and transmitter) operating in the frequency range 433 MHz, with Interface the SPI communication. When the voltage of 2.7 V - 3.3 V, are the findings of the goldpin connector. Has an external antenna with a SMA connector.
The FireBeetle module compatible with Arduino, equipped with LoRa SX127x 433 MHz module with built-in PA (Power Amplifier), controlling is through SPI interface. It is used for wireless communications with a frequency of 433 MHz. It is designed for IoT projects (Internet of Things). The module is powered with a voltage of 3.3 V.
A radio transmitter operating on FM, on the basis of high-class model of the Si4713. The device provides within a radius of 10 m, communicates via I2C interface, works with a voltage from 3 V to 5 V. also Allows data to be transmitted RDS / RBDS and has a soldered connector audio Jack.
A small module with a 32-bit microcontroller ARM Cortex M0 ATSAMD21G18 known from Arduino Zero and the radio module RFM96 433 MHz of long range (LoRa). Feather is designed for portable projects. On board is a connector microUSB, through which the system can be programmed in the Arduino IDE. There is also place for other elements, such as buttons or sensors.
A radio module (transmitter and receiver) working in 2.4 GHz band, with the communication interface SPI. Powered with the voltage from 1.9 V to 3.6 V, the leads are connectors goldpin. Has an additional antenna and the hardware FIFO. Thanks to the use of a chip NRF24L01 + PA + LNA ,range up to 1000 meters.
A module made by Seeedstudio, equipped with a microcontroller ATSAMD21G18 with bootloader Arduino Zero and the module LoRa RHF76-052AM. It has 20 digital input/output, 18 channels of PWM, 6 analog inputs, 1 analog output, as well as popular communication interfaces. The board contains a FTDI chip and microUSB connector. The module allows you to work with...
A module made by Seeedstudio, equipped with a microcontroller ATSAMD21G18 with bootloader Arduino Zero and the module LoRa RHF76-052AM and GPS Quectel L70. It has 20 digital input/output, 18 channels of PWM, 6 analog inputs, 1 analog output, as well as popular communication interfaces. The board contains a FTDI chip and microUSB connector. The...
The module is equipped with a 32-bit processor Atmel ARM Cortex-M0+, 256KB Flash memory and 32KB SRAM. It combines the capabilities of tile MKR Zero and connectivity LoRa. The ideal solution for projects requiring wireless connection or IoT.
Module enables remote control of up to 8 devices operating with a voltage of 12 V with a current consumption up to 10 A through the relay outputs NO/NC. Communication on the 433.92 MHz frequency, operating range of around 100 meters.
Starter kit for building systems that use data communication protocols ZigBee. Consists of a plate ZB502, Core2530 module with antenna and micro usb cable and the connecting cables. The kit allows wireless transmission of up to 350 metres.
Module with wi-fi and Bluetooth, ESP-WROOM-32 and a modem Laura RFM95W 915 MHz. One use is to convert the message to the radio-Laura in the data packets, to which access can be obtained via the Internet. It is an ideal tool for monitoring multiple devices Laura and forwarding their messages to the cloud.
Wireless radio module working on frequency 433 MHz, with interface the SPI communication. Voltage supply of 2.2 V - 3.8 V, are the findings of the goldpin connector. Max. the output of the receiver 5 dBm, the receiver sensitivity is -109 dBm.
Wireless radio module working on frequency 868 MHz communication interface is SPI. Voltage supply of 2.2 V - 3.8 V, are the findings of the goldpin connector. Max. the power of 4 dBm, the receiver sensitivity is -105 dBm.
Wireless radio transmitter operating on the 2.4 GHz frequency, the communication interface is SPI. The power voltage of 1.9 V and 3.6 V, are pin goldpin. Built-in PCB antenna, range up to 80 meters. It is a newer version of the module RFM70-D.